F1 23 (Console)

Tip

Using a dashboard or other third-party peripheral? Then you need to configure a custom UDP port. See Use SIMRIG Control Center with SimHub and F1 22.

Switch to PC instructions

Enable UDP Telemetry in Game Options:

1. Start F1 23

2. Enter Options from the Home menu

3. Enter Settings

4. Enter Telemetry Settings

5. Set UDP Telemetry to On

6. Set UDP Send Rate to 60 Hz

7. Set UDP Format to 2022

8. Enter your PC’s IP address under UDP IP Address

9. Manually choose F1 2023 as the telemetry source in SIMRIG Control Center (see Telemetry source selection)

10. Done