F1 25 (Console)

Tip

Using a dashboard or other third-party peripheral? Then you need to configure a custom UDP port. See Use SIMRIG Control Center with SimHub and F1 22.

Switch to PC instructions

Enable UDP Telemetry in Game Options:

  1. Start F1 25

  2. Enter Options from the Home menu

  3. Enter Settings

  4. Enter Telemetry Settings

  5. Set UDP Telemetry to On

  6. Set UDP Send Rate to 60 Hz

  7. Set UDP Format to 2025

  8. Set UDP Port to 20778

  9. Enter your PC’s IP address under UDP IP Address

  10. Manually choose F1 25 as the telemetry source in SIMRIG Control Center (see Telemetry source selection)

  11. Done

../../_images/settings.png

The screenshot shows the default port 20777. SIMRIG Control Center listens on 20778.